Insulate Your Windows With Bubble Wrap

Here is a fairly inexpensive way to insulate your windows efficiently.

  • Unlike insulating shades that block the sunlight, bubble wrap is clear and lets most of the sunlight through so you still have a cozy, inviting room that is warmer and feels more open.
  • Bubble wrap can be reused for several years, generally 5-7. You’ll know it’s time to replace the wrap when it sticks to the window and removing it gets difficult.
  • Get creative on finding your bubble wrap, as lots of people are throwing it out. Check with furniture stores and other retailers who throw away bubble wrap on a frequent basis and volunteer to dispose of it for them … so it might be free (well, your time really isn’t free).
  • Hardware stores sell “window sealing kits” that use sticky tape. When the sticky tape sits too long, it’s difficult to remove. The film isn’t reusable so you’ll need to buy a new kit each year.
  • Bubble wrap is easy to put up, take down and roll up to store over the summer. You should label each piece of bubble wrap as they’ll all look the same when you take them down. Draw a layout of the rooms and label each window AND bubble wrap, i.e. DLB = dining room left window bottom, DLT, DRB, DRT, etc.

Measure windows before cutting plastic sheetsInstalling Your Bubble Wrap

  • Measure each window pane, following the well known rule “measure twice, cut once” … following diagram shown here.
  • Cut the bubble wrap, using a paper template if that will make you more comfortable.
  • Spray a light film of water on the window using a small spray bottle. If it’s used, clean it thoroughly as you don’t want to leave a film on your glass or worry about the bubble plastic.
  • Press the bubble side against the window while it’s still wet, and position it to fill the space fully.  A tight fit means both the air trapped inside the bubbles, and the air between the window pane and the back of the bubble wrap will help reduce air flow, and save you heating dollars.
  • If the bubble wrap starts to separate from the window, the recommendation at BuildItSolar.com is to add glycerine to the water.

Removing Your Bubble Wrap

The bubble wrap should come off easily. Depending on the quality of the plastic, it should last several years and when it becomes difficult to remove, it’s time to replace it.  Peel gently, starting at one corner. Remember to mark each piece as you remove it so each piece goes back where it started. There shouldn’t be any mess but you’re already there, so maybe it’s the right time to wash your windows.

– See more at: http://www.hometips4women.com/tips-4-saving-bubble-wrap-your-windows#sthash.HLkTKFGh.dpuf

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s